Hi,
when editing a policy in vROps 6.7 there is a Workload Automation section and there I can set a Cluster Headroom percentage. When is this percentage taken into account? Only for Workload Balancing between clusters or is this percentage also used in capacity calculations for a cluster? In other words, is it similar to the Buffers (as in the HA and Buffers) setting in previous vROps versions?
Regards,
J-
Hi All,
I am trying to do some storage practicals for Windows Server 2012 R2 on VMware Workstation.
I would like to add new virtual HD as an SSD and normal SCSI HDDs as well
Is this possible?
I added some SCSI virtual HDD but even they dont detect as SCSI after I finish loading windows server 2012 R2
Server Manager>File and Storage Services> Volumes > Storage Pools > (under) Physical disks > Media type is "Unknown"
See below screenshot
Trong lĩnh vực marketing, các thiết kế in ấn chuyên nghiệp như làm catalogue giá rẻ, in tờ rơi đẹp hay mẫu brochure ấn tượng chắc chắn sẽ là giải pháp hoàn hảo, gây ấn tượng mạnh, tích cực với người tiêu dùng.
Chưa kể, với tính cạnh tranh ngày càng cao, các doanh nghiệp phải đưa ra những chiêu thức marketing, quảng cáo sáng tạo để thu hút khách hàng. Các mẫu tờ rơi đẹp, mẫu brochure quảng cáo từ đó ra đời và phát triển từng bước đầy ấn tượng, nhằm thu hút người xem.
Mẫu brochure về dịch vụ thẩm mỹ, gym thường có 4 trang với các thông tin cơ bản giúp giới thiệu thông tin của dịch vụ spa, thẩm mỹ đến khách hàng. Các dạng brochure này bạn có thể thiết kế với phần mềm Photoshop hoặc Indesign.
Image may be NSFW.
Clik here to view.
Hình 01: Brochure dịch vụ thẩm mỹ, gym
Bên cạnh đó, mẫu brochure gấp doanh nghiệp, giới thiệu công ty cũng rất hay được sử dụng. Đặc biệt với sản phẩm thiết kế nội thất, đen, đỏ, trắng thường là tong màu chủ đạo của mẫu brochure này với các hình ảnh trực quan và thông tin ngắn gọn.
Image may be NSFW.
Clik here to view.
Hình 02: Brochure gấp doanh nghiệp
Ngoài brochure, các mẫu tờ rơi đẹp cũng đem đến sức mạnh quảng cáo, hiệu quả tức thì mà chi phí thấp. Một tờ rơi có thiết kế đẹp, màu sắc bắt mắt chắc chắn sẽ dẫn dắt khách hàng tiềm năng tìm đến bạn. Nó không chỉ cung cấp đầy đủ thông tin mà còn giúp chúng ta dễ dàng ghi nhớ, lưu giữ lại, bằng cách gấp nhỏ gọn và cất nó đi.
Ngoài ra, tờ rơi còn giúp doanh nghiệp nâng cao doanh số bán hàng. Tờ rơi đặc biệt phát huy hiệu quả trong các hội chợ giới thiệu trưng bày sản phẩm, giúp bạn đem đầy đủ thông tin về sản phẩm tới khách hàng đồng thời giảm bớt được chi phí về nhân sự và tiền bạc.
Tuy nhiên, không phải lúc nào tờ rơi cũng gây được ấn tượng ngay khi tới tay người nhận, đôi khi nó lại biến thành một loại rác thải khi vừa rời tay người phát tờ rơi. Đó là tại vì thiết kế xấu không bắt mắt, nội dung nhàm chán không gây được ấn tượng sâu sắc gì tới người đọc, họ không bị kích thích nên dễ dàng vứt bỏ tờ rơi ngay khi nhận được.
Do vậy việc thiết kế lên ý tưởng, bố cục màu sắc ấn tượng sáng tạo là rất quan trọng. Với đội ngũ nhân viên thiết kế sáng tạo, nhiệt tình, kinh nghiệm lâu năm, thiết kế tờ rơi quảng cáo Hoa Sen Xanh chắc chắn sẽ giúp bạn có một sản phẩm đẹp về kiểu dáng, nội dung và màu sắc, đồng thời luôn luôn chú trọng trong khâu sản xuất in ấn sản phẩm.
Image may be NSFW.
Clik here to view.
Đó là màu sắc, bố cục hình ảnh nội dung phải hài hòa cùng một thể thống nhất từ đầu tới cuối. Ngay từ bước đầu lên ý tưởng thiết kế phải chọn cho tờ rơi cần làm nội dung những từ ngữ ấn tượng nhất sâu sắc...
Hình ảnh bắt mắt nhất, nó là tuyệt đối quan trọng để quyết định tờ rơi của bạn có hấp dẫn khách hàng khi họ nhìn vào sản phẩm trên đó hay không. Tiếp đến là bố cục màu sắc phải hài hòa sinh động. một khâu quan trọng tiếp theo là in tờ rơi phải sắc nét nổi bật được mọi chi tiết dù nhỏ nhất trong thiết kế, quy cách gia công đa dạng độc đáo làm cho khách hàng cảm thấy thích thú.
- Công nghệ in nhanh (in laser màu): lấy được sản phẩm trong vòng 1 – 2 tiếng. Tuy nhiên chất lượng không được đẹp bằng in offset và chi phí in tương đối cao. Loại hình in này phù hợp nếu bạn in số lượng ít.
- Công nghệ in offset: mang lại các ưu điểm như màu sắc đẹp, chi phí thấp và bền theo thời gian. Thời gian xong sản phẩm khoảng 2 – 3 ngày và đơn hàng, số lượng in càng lớn thì giá càng giảm.
Ngoài hai ấn phẩm là brochure và tờ rơi thì catalogue là ấn phẩm không thể thiếu của mọi doanh nghiệp. Một cuốn catalogue sáng tạo sẽ giúp doanh nghiệp tiếp thị thương hiệu hiệu quả, mang sản phẩm đến với khách hàng và tăng doanh thu bán hàng.
Nắm bắt xu thế đó, Hoa Sen Xanh hiện đang là công ty thiết kế brochure, công ty thiết kế catalogue giá rẻ TPHCM chất lượng, uy tín tại TpHCM. Công ty đảm bảo chất lượng sản phẩm đem đến cho khách hàng là tốt nhất, với hệ thống máy móc hiện đại, giá cả cạnh tranh nhất thị trường.
Hiện nay chúng tôi đang sử dụng công nghệ in offset công nghiệp cho chất lượng in catalogue siêu nét, siêu mịn, sản phẩm được gia công vào quyển với tốc độ cao và độ chính xác tuyệt đối. Khách hàng đã từng đặt in catalogue tại công ty Hoa Sen Xanh đều có chung cảm nhận về sự chuyên nghiệp trong sản phẩm thiết kế của chúng tôi.
Các mẫu in catalogue được cập nhập thường xuyên và liên tục trên hệ thống website của chúng tôi, khách hàng có thể tham khảo và đặt in catalogue ngay khi ưng ý hoặc tự thiết kế theo mẫu có sẵn.
Hãy liên hệ với Hoa Sen Xanhđể được hỗ trợ, tư vấn nhanh chóng và tốt nhất qua hotline 028 62619307 – 028 39405170 hoặc địa chỉ số 280/170 Nguyễn Tất Thành, P.13, Q.4, Tp.HCM.
Hi!
I'm working on a windows 10 image, where we need to configure onedrive for business so we only get a shadow copy of the files.
I have tried to figure out how we can manage this, and there are so many cookbooks on how to do this, but most of them includes a third-party software that includes a license.
We are running non-presistent desktopswith office 365 installed in the Golden Image, and can not let the synch tool synchronize every time they logs on since the cmoputers are deleted when users logs out.
How have you guys managed onedrive for your users?
any step-by-step guide will be appreciated.
BR
Running ESXI 5.5.0 Build 3717267.
Guest is running SUSE Linux Enterprise Server 11 SP4.
Guest is running open-vm-tools.
Guest is continuously creating files in directory: /var/lib/vmware-caf/pme/data/output/responses and eventually fills up the partition.
Sample file name: /var/lib/vmware-caf/pme/data/output/responses/7F7857C7-2D02-5833-0A90-0A0A11D80600_errorResponse.xml
<?xml version="1.0" encoding="UTF-8"?><caf:errorResponse xmlns:caf="http://schemas.vmware.com/caf/schema/fx" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.vmware.com/caf/schema/fxhttp://10.25.57.32/caf-downloads/schema/fx/Response.xsd" clientId="00000000-0000-0000-0000-000000000000" requestId="00000000-0000-0000-0000-000000000000" errorMessage="[PathNotFoundException] FileSystemUtils::itemsInDirectory() Directory does not exist: /var/lib/vmware-caf/pme/data/input/providerReg"><responseHeader version="1.0" createdDateTime="2016-11-21T17:21:06Z" sequenceNumber="0" isFinalResponse="true" sessionId="00000000-0000-0000-0000-000000000000"/></caf:errorResponse>
What is causing this and how do I make it stop?
thanks
Hi guys,
I'm just checking v14 before I pay for the upgrade from my v12.5.
Biggest selling point is the nvme support and (hopefully) better performance on my Samsung 960 Pro NVMe.
I was able to create and install a new VM with Windows Server 2016 on a NVMe vmdk with no problems.
But I also need support for my (existing) Win7 VMs.
So I added a 2nd harddrive to one of my existing Win7 VMs (after upgrading them from v12.5 to v14). And I updated the VM Tools with a complete installation as well.
But device manager still shows me an "Unkown PCI device" instead of the NVMe driver/disk.
Its Hardware-ID = VEN_15AD&DEV_07F0&SUBSYS_07F015AD&REV_00 which indicates as the VMWare NVMe controller.
How do I install the NVMe driver on my Win7 guest to make an NVMe vmdk work?
Thanks
Soko
I recently installed V14 to demo it while having a licensed version of V11. It appears that it overwrote, versus a separate install. It did not give me a choice on install. Not I am stuck with an eval version and no apparent way to get back. Ideas?
Running a trial version of VMWare workstation 14 pro with Linux Mint 18 as host. Have a virtual machine with Win7 as the guest OS. It's been buggy from the start, so I want to remove it and start over. Buth the "power off" and stop button do not stop it. If I click the win7 machine I get a blank page with the loading (circling) arrow. I've let it run up to 18 minutes but it never does load. I can't uninstall it while it's running, and I can't shut it off. Trying to uninstall workstation gives me the same issues. Can't stop the virtual machine and can't uninstall until I do.
Any help would be most appreciated! Thanks.
Please close this thread. I managed to get it removed and have now uninstalled workstation.
Hi,
I am facing a weird issue here on ESxi 5.5 host and its VMs. The VMs were running fine also the ESXI host was reachable. But suddenly i lost the connectivity and when I checked from vsphere client, all the VMs were in hung state, when I tried to open the consoles for it, I got below message "
After some research on google, I found that ESx host reboot will fix it and/or hp-ams service stop will fix it. Since I was not able to get into the server remotely, I had to reboot the host manually. After reboot, the VMs are running fine and everything normal now, but when I tried to search for hp-ams service on host. I didnt find that service or I did not even find the hphelper log file anywhere on the host.
Can someone please let me know what could be the other reason if hp-ams is not there and how can I stop this crash occurring again ?
Hi,
Any suggestions on what could cause this behavior?
We're allowing external traffic to a VDI environment. The necessary ports are listening. Using Chrome for HTML connections, we can get to the site and authenticate, but after clicking a desktop pool to open we get a Print page like below. If cancelled, it remains a blank window.
Other browsers open to a blank window. Only Chrome opens the Print page, but none of the browsers open a desktop without VPN. But all can authenticate.
IE, Safari, FireFox and Chrome were tested.
When onsite or on VPN, the connections work as expected.
Image may be NSFW.
Clik here to view.
Thanks for any help or suggestions.
I tried to migrate a VM with RDMs to a new host and get errors like "Disk 8 not found, disk 10 not found, etc". These are Cisco UCS blades using the same profiles. The storage on the back end seems to be zoned correctly. If I look on the storage adapter of both hosts, they seem to show the same devices. I'm not sure if what shows up as devices on the HBA include the RDMs or, are they just the regular VMFS volumes? Is there a way to tell?
From the command line on a host, is there a way to display the RDMs that are zoned to that host? I know I can see them on the source host but, is there a way to see them on the destiation host before doing a Vmotion?
When I open a running VM and select the Console> Launch Remote Console nothing happens. I know VMRC works because when I paste the following url into my browser vmrc://<esxi-ip>/?moid=1 it automatically opens VMRC and I am able to access the VM. I had just installed the ESXi Embedded Host Client - do I need to enable anything to allow this service?
Additional Info
Client version: 1.29.0
Client build number: 8122819
ESXi version: 5.5.0
ESXi build number: 1892794
Any ideas what might be causing this? I tested IE 11, Safari, Firefox, and Google Chrome. Thanks!
I ran tests on our 6.5 servers and the button works as intended...argh!
I am tring to assist sec team in getting a Tenable Nessus Scan on ESXi hosts and the associated Vcenter. The Tenable document claims to use the SOAP API but I do not see anything to configure and all requested ports are avaialble.
1. I have created a readonly profile for a new local ESX user for the scanner to use
a. do see the message login failed when the scanner connects to the test ESX host.
b. did try enable shell and ssh - but that did nothing the scannner is try to authenticate with SSL I bleive not SSH
2. The scanner does get some basic high level results but nothing more.
3. Added local user account on the Vcenter and also READ ONLY permisions
a. Same results as the ESXi scan.
4. Must a ssl certificate be used or can straight local authentication be used for ssl connection?
Are there any configuration or changes that need to be made to provide SOAP API access to the Scanner from the VMware infrastruture. Is the SOAP API a native module on ESX/Vcenter?
Hello!
I've got strange situation with creating organization's VDC with powercli.
When i create Org in web i've got over-commit by CPU but i can go further to next options with clicking Yes.
Image may be NSFW.
Clik here to view.
But when i'm trying to create Org VDC with New-OrgVdc i've got 403 error - Forbidden:
Image may be NSFW.
Clik here to view.
If i go to another vCloud area without CPU over-commit and try to use New-OrgVdc to create Org VDC - it works fine.
Maybe there is any option to Force New-OrgVdc command to create Org VDC and dont check for over-commiting resources?
Thanks in advance.
Hello friends,
We currently have 2 VM host servers.
Both servers are 2 CPU quad core
They are licensed as 8 VMware vSphere 6 Standard for 1 processor.
How does one go about adding more host?
I would like to add two more host servers, (both 2 CPU quad core)
Do I just purchase 8 more VMware vSphere 6 Standard for 1 processor licenses?
is there anything else we need to do? they would still be controlled under 1 vcenter.
Thank you in advance,
David
I am working on setting up a file system to handle millions of small files that will be randomly accessed. They will be served up via web servers using either NFS or SMB to access them. I like what I have been reading about XFS and some of its features such as parallelism. I want to have this be very high performance and that made me think about some things: are there any penalties or benefits of using either RAW mapping or putting the XFS partition on a VMDK stored on a VMFS partition? The back end storage is a Compellent SAN with tiered storage. Basically, does anyone know if it will make any differences in the way XFS performs if its built directly on the disk, or built onto of a VMFS partition?
I would be happy to accept any suggestions as well, I am in the designing phase now, so any thoughts or input would be helpful.
Regards,
Eduard Teiseler
I can not connect to the Appliance interface (Version 6.5) using root/password credentials knowing that I can connect directly via ssh without any problem.
in the log file we found the message bellow :
51728]ERROR:root:Structure('LocalizableMessage', dict(defaultMessage='The maximum number of sessions has been reached', args=[]om.vmware.applmgmt.admind.authenticate.max.session'))
According to the error message, It seems that we have reached a maximum number of sessions on the interface of the Appliance, is this the case? if so, how can this number be reset?
We have tried the following procedure without success: delete and recreate the derectory :/etc/applmgmt/appliance/session/, stop and restart the service: vami-lighttpd
Any idea please ?? thinks in advance.
I am trying to fetch the patch,AV and application service status using invoke cmdlet. Its failing to write the output.
If I try to get McAfee and Service status its displaying the output but for the third script which is failing to write output($hotfixinfo).
If I log in to the VM manually and execute it I can get the output.
$script = @'
if([IntPtr]::Size -eq 8){ $text = Get-ItemProperty -Path "HKLM:\SOFTWARE\WOW6432Node\Network Associates\ePolicy Orchestrator\Agent\" -ErrorAction SilentlyContinue | %{"$($_.AgentGUID)"}
}
elseif([IntPtr]::Size -eq 4){ $text = Get-ItemProperty -Path "HKLM:\SOFTWARE\Network Associates\ePolicy Orchestrator\Agent\" -ErrorAction SilentlyContinue | %{"$($_.AgentGUID)"}
}
if(-not $text){ $text = Get-Service -Name "McAfee Framework Service" -ErrorAction SilentlyContinue | %{"$($_.Name) is $($_.Status)"} if(-not $text){ $text = Get-Service -Name wuauserv | Select -First 1 | %{"$($_.Name) is $($_.Status)"} }
}
$cbout = Get-Service -Name "CarbonBlack" -ErrorAction SilentlyContinue | Select -first 1 | %{"$($_.Name) is $($_.Status)"}
if(-not $cbout){ $cbout = Get-Service -Name wuauserv | Select -first 1 | %{"$($_.Name) is $($_.Status)"}
}
$hotfixinfo=@()
[reflection.assembly]::LoadWithPartialName("System.Version")
$os = Get-WmiObject -class Win32_OperatingSystem
$osName = $os.Caption
$s = "%systemroot%\system32\drivers\srv.sys"
$v = [System.Environment]::ExpandEnvironmentVariables($s)
If (Test-Path "$v") { Try { $versionInfo = (Get-Item $v).VersionInfo $versionString = "$($versionInfo.FileMajorPart).$($versionInfo.FileMinorPart).$($versionInfo.FileBuildPart).$($versionInfo.FilePrivatePart)" $fileVersion = New-Object System.Version($versionString) } Catch { $hotfixinfo+= "Unable to retrieve file version info, please verify vulnerability state manually." Return } }
Else { $hotfixinfo+= "Srv.sys does not exist, please verify vulnerability state manually." Return }
if ($osName.Contains("Vista") -or ($osName.Contains("2008") -and -not $osName.Contains("R2"))) { if ($versionString.Split('.')[3][0] -eq "1") { $currentOS = "$osName GDR" $expectedVersion = New-Object System.Version("6.0.6002.19743") } elseif ($versionString.Split('.')[3][0] -eq "2") { $currentOS = "$osName LDR" $expectedVersion = New-Object System.Version("6.0.6002.24067") } else { $currentOS = "$osName" $expectedVersion = New-Object System.Version("9.9.9999.99999") } }
elseif ($osName.Contains("Windows 7") -or ($osName.Contains("2008 R2"))) { $currentOS = "$osName LDR" $expectedVersion = New-Object System.Version("6.1.7601.23689") }
elseif ($osName.Contains("Windows 8.1") -or $osName.Contains("2012 R2")) { $currentOS = "$osName LDR" $expectedVersion = New-Object System.Version("6.3.9600.18604") }
elseif ($osName.Contains("Windows 8") -or $osName.Contains("2012")) { $currentOS = "$osName LDR" $expectedVersion = New-Object System.Version("6.2.9200.22099") }
elseif ($osName.Contains("Windows 10")) { if ($os.BuildNumber -eq "10240") { $currentOS = "$osName TH1" $expectedVersion = New-Object System.Version("10.0.10240.17319") } elseif ($os.BuildNumber -eq "10586") { $currentOS = "$osName TH2" $expectedVersion = New-Object System.Version("10.0.10586.839") } elseif ($os.BuildNumber -eq "14393") { $currentOS = "$($osName) RS1" $expectedVersion = New-Object System.Version("10.0.14393.953") } elseif ($os.BuildNumber -eq "15063") { $currentOS = "$osName RS2" $hotfixinfo+="No need to Patch. RS2 is released as patched. " return } }
elseif ($osName.Contains("2016")) { $currentOS = "$osName" $expectedVersion = New-Object System.Version("10.0.14393.953") }
elseif ($osName.Contains("Windows XP")) { $currentOS = "$osName" $expectedVersion = New-Object System.Version("5.1.2600.7208") }
elseif ($osName.Contains("Server 2003")) { $currentOS = "$osName" $expectedVersion = New-Object System.Version("5.2.3790.6021") }
else { $hotfixinfo+="Unable to determine OS applicability, please verify vulnerability state manually." $currentOS = "$osName" $expectedVersion = New-Object System.Version("9.9.9999.99999") }
#Write-Host "`n`nCurrent OS: $currentOS (Build Number $($os.BuildNumber))" -ForegroundColor Cyan
#Write-Host "`nExpected Version of srv.sys: $($expectedVersion.ToString())" -ForegroundColor Cyan
#Write-Host "`nActual Version of srv.sys: $($fileVersion.ToString())" -ForegroundColor Cyan
If ($($fileVersion.CompareTo($expectedVersion)) -lt 0) { $hotfixinfo+= "`n`n" $hotfixinfo+= "System is NOT Patched" }
Else { $hotfixinfo+= "`n`n" $hotfixinfo+= "System is Patched" }
$outputarray=@()
$outputarray+=$hotfixinfo
$outputarray+=$cbout
$outputarray+=$text
$outputarray -join ';'
'@
$obj = foreach($vm in (Get-VM | Where-Object {$_.PowerState -eq "Poweredon" -and $_.ExtensionData.Config.GuestFullName -like "*Microsoft*"})) {
$out1 = Invoke-VMScript -VM $vm.Name -GuestUser "administrator" -GuestPassword "" -ScriptText $script -ScriptType Powershell -ErrorAction Stop | Select -ExpandProperty ScriptOutput
New-Object PSObject -Property ( [ordered]@{ Name = $vm.Name OS = $vm.Guest.OSFullName IP = ($vm.Guest.IPAddress | Where {($_.Split(".")).length -eq 4}) -join (",") Cluster=$vm.VMHost.Parent.Name RP = $vm.ResourcePool.Name Out1 = $out1 })
}
$obj
#|Export-Csv -Path 'C:\My Data\CSV Output\report.csv' -NoTypeInformation -NoClobberHi There,
I have VMware Workstation 14.0.0 Build-6661328 Player installed on Windows 7 Professional, I am trying to create a Windows XP Proffessional virtual machine (tried with a CD and also an ISO), the trouble is when I start it up I get the message "Unable to connect to the MKS: Too many socket connect attempts; giving up".
Any ideas greatly appreciated.
Thanks
I found this: Fusion 8 + Windows 10 Unity mode messed up window borders when I did some light searching first, that's Fusion 8, I'm on 10 though, is there a fix for this?
I also had Fusion 8 and it didn't work either, upgraded to 10 hoping it was fixed but still isn't or most likely I'm misconfiguring something. I tried disabling the window shadows in Windows since clearly Fusion or macOS are adding their own, but it doesn't work. I've disabled and enable 3D acceleration, the retina options, changed video memory sizes and I can't get it to work.
When I took the following screen show a new artifact appears now, it's a nice thick black border where the padding used to be but only if the Windows' window is drawn in the macOS "area" if it overlaps a Windows zone it shows the padding.
Image may be NSFW.
Clik here to view.
I installed one of those apps that goes against OS' conventions and draw what it pleases, Opera here, but it reacts in the same manner.
I queried the help section but nothing relevant appeared, any ideas?
Thanks!