Windows(物理） 上にある vCenter Server バージョン 5.5 の環境から

vCenter Server Appliance 6.5 環境（ESXi）への移行を進めております。

移行の中で何点か不明な点がありますので、質問させて下さい。

１．ネットワークの前提条件として以下の様にあります

　＞アプライアンスの一時的なネットワーク設定に固定 IP アドレスを割り当てる場合は、

　＞IP アドレス用にDNS レコードの正引きおよび逆引きが設定されていることを確認します。

　移行元であるVCSの方のIPアドレスに対してはDNS登録設定していますが

　移行用の一時的な IPアドレスに対しても、VCSと同じDNSの設定をしておく必要がある

　との認識でよろしいでしょうか。

２．移行時のターゲットの vCenter Server Appliance の名前ですが、

　　VCSと同じではいけないのでしょか。

　　元々物理サーバーとして存在していましたので、仮想マシン名として

　　被る事はなく可能であれば同じ名前で利用したいと考えております。

３．hostsファイルについて

　　VCSからVCSAへの移行の際に、hosts情報は引き継がれるのでしょうか。

　　立上げ後に設定が必要でしょうか。

知識不足で申し訳ありませんが、よろしくお願い致します。

Hello!

I recently purchased two Chelsio t520-cr 10G nics to connect my ESXi box to my FreeNAS box.  I installed both cards and connected them, but the card was not found in ESXi.  I downloaded the driver from Chelsio and installed the cxl driver per the instructions.

The card is listed by lspci:

[root@orion:~] lspci | grep Chelsio

0000:01:00.0 Network controller: Chelsio Communications Inc. T520-CR Unified Wire Ethernet Controller

0000:01:00.1 Network controller: Chelsio Communications Inc. T520-CR Unified Wire Ethernet Controller

0000:01:00.2 Network controller: Chelsio Communications Inc. T520-CR Unified Wire Ethernet Controller

0000:01:00.3 Network controller: Chelsio Communications Inc. T520-CR Unified Wire Ethernet Controller

0000:01:00.4 Network controller: Chelsio Communications Inc. T520-CR Unified Wire Bus Enumerator

0000:01:00.5 Mass storage controller: Chelsio Communications Inc T520-CR Unified Wire Storage Controller

0000:01:00.6 Serial bus controller: Chelsio Communications Inc T520-CR Unified Wire Storage Controller

[root@orion:~]

and the driver appears to be loaded:

[root@orion:~] esxcli software vib list | grep cxl

cxl                            2.0.0.21-1OEM.650.0.0.4598673         Chelsio  VMwareCertified   2018-06-17

[root@orion:~]

and the kernel logs says it loaded the driver:

[root@orion:~] cat /var/log/vmkernel.log

...

2018-06-17T19:30:16.259Z cpu2:2099757)Loading module cxl ...

2018-06-17T19:30:16.265Z cpu2:2099757)Elf: 2101: module cxl has license ThirdParty

2018-06-17T19:30:16.337Z cpu2:2099757)Device: 192: Registered driver 'cxl' from 96

2018-06-17T19:30:16.337Z cpu2:2099757)Chelsio T5/T6 Native Network Driver - version 2.0.0.21

2018-06-17T19:30:16.338Z cpu2:2099757)Mod: 4962: Initialization of cxl succeeded with module ID 96.

2018-06-17T19:30:16.338Z cpu2:2099757)cxl loaded successfully.

[root@orion:~]

However, when I list the nics, the chelsio card is not listed.  Only the onboard gigabit ethernet(s):

[root@orion:~] esxcfg-nics -l

Name    PCI          Driver      Link Speed      Duplex MAC Address       MTU    Description

vmnic0  0000:03:00.0 igbn        Up   1000Mbps   Full   ac:1f:6b:46:89:d0 1500   Intel Corporation I350 Gigabit Network Connection

vmnic1  0000:03:00.1 igbn        Up   1000Mbps   Full   ac:1f:6b:46:89:d1 1500   Intel Corporation I350 Gigabit Network Connection

[root@orion:~]

I've rebooted several times with no luck.  The card itself has a steady red light which according to chelsio's documentation, just means that the card has power and it should go out when the driver is loaded.  The card that I installed in the FreeNAS box was detected and the light is out as they suggested it would be.

I'm really stuck. Any ideas are welcome!  Thanks!

I was wondering if it is possible with VMWare to run a separate OS per desktop where that entire desktop is assigned to that OS and just that OS. It would be better if I could have 2 linux and a windows desktop on my laptop. I dont want there to be border bars or anything like that, just three finger swipe and then viola. I have VMWare Player Pro and it wont really do this. It will work as a maximized window in a desktop but not as the desktop itself.

I've updated vCenter to the available update from Update Manager via WebGUI. After rebooting, I cannot access anything. both https://myserver or https://myserver:5480 as well. I've tried to Google and change password of root account, DB password, postgres password, etc... but nothing helped. Below is some logs, pls help me to solve this because this is the only vCenter in our system.

root@localhost [ ~ ]# service-control --status --all

Running:

applmgmt lwsmd vmafdd vmcad vmdird vmdnsd vmonapi vmware-cis-license vmware-eam vmware-psc-client vmware-rhttpproxy vmware-sca vmware-statsmonitor vmware-sts-idmd vmware-stsd vmware-vmon vmware-vpostgres vsphere-client vsphere-ui

Stopped:

pschealth vmcam vmware-cm vmware-content-library vmware-imagebuilder vmware-mbcs vmware-netdumper vmware-perfcharts vmware-rbd-watchdog vmware-sps vmware-updatemgr vmware-vapi-endpoint vmware-vcha vmware-vpxd vmware-vpxd-svcs vmware-vsan-health vmware-vsm

root@localhost [ ~ ]#

 

root@localhost [ ~ ]# vi /var/log/vmware/vpxd/vpxd.log

2018-06-17T17:30:15.861+07:00 error vpxd[7FDE06A68800] [Originator@6876 sub=Authorize] Failed to initialize authorizeManager

2018-06-17T17:30:15.861+07:00 warning vpxd[7FDE06A68800] [Originator@6876 sub=VpxProfiler] Start [VpxdAuthorize::Start()] took 186628 ms

2018-06-17T17:30:15.861+07:00 warning vpxd[7FDE06A68800] [Originator@6876 sub=VpxProfiler] ServerApp::Start [TotalTime] took 187161 ms

2018-06-17T17:30:15.861+07:00 error vpxd[7FDE06A68800] [Originator@6876 sub=Default] Failed to start VMware VirtualCenter. Shutting down

2018-06-17T17:30:15.861+07:00 info vpxd[7FDE06A68800] [Originator@6876 sub=SupportMgr] Wrote uptime information

2018-06-17T17:31:39.507+07:00 info vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] CmConnectionFSM::RunFSM(ST_CM_CALL_FAILED)

2018-06-17T17:31:39.510+07:00 warning vpxd[7FDDD0B16700] [Originator@6876 sub=Default] Failed to connect socket; <io_obj p:0x00007fddec0341c0, h:12, <TCP '0.0.0.0:0'>, <TCP '127.0.0.1:18090'>>, e: system:111(Connection refused)

2018-06-17T17:31:39.510+07:00 error vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] [CisConnection]: ComponentManager->LoginByToken failed: Connection refused

2018-06-17T17:31:39.510+07:00 warning vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] State(ST_CM_LOGIN) failed with: Connection refused

2018-06-17T17:31:39.569+07:00 warning vpxd[7FDDF8845700] [Originator@6876 sub=Default] Failed to connect socket; <io_obj p:0x00007fddd41381f0, h:26, <TCP '0.0.0.0:0'>, <TCP '127.0.0.1:18090'>>, e: system:111(Connection refused)

2018-06-17T17:31:39.570+07:00 error vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] [CisConnection]: ComponentManager->LoginByToken failed: Connection refused

2018-06-17T17:31:39.570+07:00 warning vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] State(ST_CM_LOGIN) failed with: Connection refused

2018-06-17T17:31:39.645+07:00 warning vpxd[7FDDF8845700] [Originator@6876 sub=Default] Failed to connect socket; <io_obj p:0x00007fddd4127750, h:26, <TCP '0.0.0.0:0'>, <TCP '127.0.0.1:18090'>>, e: system:111(Connection refused)

2018-06-17T17:31:39.645+07:00 error vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] [CisConnection]: ComponentManager->LoginByToken failed: Connection refused

2018-06-17T17:31:39.645+07:00 warning vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] State(ST_CM_LOGIN) failed with: Connection refused

2018-06-17T17:31:39.724+07:00 warning vpxd[7FDDD172E700] [Originator@6876 sub=Default] Failed to connect socket; <io_obj p:0x00007fddc83348a0, h:26, <TCP '0.0.0.0:0'>, <TCP '127.0.0.1:18090'>>, e: system:111(Connection refused)

2018-06-17T17:31:39.729+07:00 error vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] [CisConnection]: ComponentManager->LoginByToken failed: Connection refused

2018-06-17T17:31:39.729+07:00 warning vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] State(ST_CM_LOGIN) failed with: Connection refused

2018-06-17T17:31:39.729+07:00 warning vpxd[7FDDD3AF5700] [Originator@6876 sub=HostGateway] Ignoring exception during refresh of HostGateway cache: N7Vmacore15SystemExceptionE(Connection refused)

--> [context]zKq7AVECAAAAAAHCfgAPdnB4ZAAAJGcrbGlidm1hY29yZS5zbwAA9B4bAD5vGABwKCsA5R0jAKgmJgCaKCYABUcmAOZSJgA36SMAo7QjAIq3IwDbvysBRHQAbGlicHRocmVhZC5zby4wAAItjA5saWJjLnNvLjYA[/context]

2018-06-17T17:32:15.886+07:00 info vpxd[7FDE06A68800] [Originator@6876 sub=Default] Forcing shutdown of VMware VirtualCenter now

 

 

root@localhost [ ~ ]# service --status-all

/etc/init.d/netconsole: line 19: .: /etc/sysconfig/network: is a directory

netconsole module not loaded

● vami-lighttp.service

   Loaded: loaded (/etc/init.d/vami-lighttp; disabled; vendor preset: enabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

running (standalone: 1326)

● vmafdd.service - LSB: Start and Stop vmafd

   Loaded: loaded (/etc/rc.d/init.d/vmafdd; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmafdd.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf, dependency.conf

   Active: active (exited) since Sun 2018-06-17 17:15:41 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1290 ExecStart=/etc/rc.d/init.d/vmafdd start (code=exited, status=0/SUCCESS)

    Tasks: 0

   Memory: 0B

      CPU: 0

 

Jun 17 17:15:39 localhost.localdom systemd[1]: Starting LSB: Start and Stop vmafd...

Jun 17 17:15:41 localhost.localdom vmafdd[1290]: Starting VMware afd Servicedone

Jun 17 17:15:41 localhost.localdom systemd[1]: Started LSB: Start and Stop vmafd.

running (standalone: 1420)

● vmcad.service - LSB: Start and Stop vmca

   Loaded: loaded (/etc/rc.d/init.d/vmcad; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmcad.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf, dependency.conf

   Active: active (exited) since Sun 2018-06-17 17:15:43 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1385 ExecStart=/etc/rc.d/init.d/vmcad start (code=exited, status=0/SUCCESS)

    Tasks: 0

   Memory: 0B

      CPU: 0

 

Jun 17 17:15:41 localhost.localdom systemd[1]: Starting LSB: Start and Stop vmca...

Jun 17 17:15:43 localhost.localdom vmcad[1385]: Starting VMware Certificate Servicedone

Jun 17 17:15:43 localhost.localdom systemd[1]: Started LSB: Start and Stop vmca.

Error: LW_ERROR_NO_SUCH_SERVICE (41204)

No service with the specified name exists

● vmcam.service - LSB: Start and Stop vmcam

   Loaded: loaded (/etc/rc.d/init.d/vmcam; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmcam.service.d

           └─dependency.conf

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

running (standalone: 1424)

● vmdird.service - LSB: Start and Stop vmdir

   Loaded: loaded (/etc/rc.d/init.d/vmdird; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmdird.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf, dependency.conf

   Active: active (exited) since Sun 2018-06-17 17:15:45 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1387 ExecStart=/etc/rc.d/init.d/vmdird start (code=exited, status=0/SUCCESS)

    Tasks: 0

   Memory: 0B

      CPU: 0

 

Jun 17 17:15:41 localhost.localdom systemd[1]: Starting LSB: Start and Stop vmdir...

Jun 17 17:15:45 localhost.localdom systemd[1]: Started LSB: Start and Stop vmdir.

Jun 17 17:15:45 localhost.localdom vmdird[1387]: Starting VMware Directory Servicedone

running (standalone: 1593)

● vmdnsd.service - LSB: Start and Stop vmdns

   Loaded: loaded (/etc/rc.d/init.d/vmdnsd; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmdnsd.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf, dependency.conf

   Active: active (exited) since Sun 2018-06-17 17:15:46 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1569 ExecStart=/etc/rc.d/init.d/vmdnsd start (code=exited, status=0/SUCCESS)

    Tasks: 0

   Memory: 0B

      CPU: 0

 

Jun 17 17:15:45 localhost.localdom systemd[1]: Starting LSB: Start and Stop vmdns...

Jun 17 17:15:46 localhost.localdom vmdnsd[1569]: Starting VMware Domain Name Servicedone

Jun 17 17:15:46 localhost.localdom systemd[1]: Started LSB: Start and Stop vmdns.

msg_unused

● vmware-imagebuilder.service - LSB: VMware Image Builder Server

   Loaded: loaded (/etc/rc.d/init.d/vmware-imagebuilder; bad; vendor preset: enabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

watchdog  is not running

webserver is not running

logdumper is not running

● vmware-netdumper.service - LSB: VMware network core dump server

   Loaded: loaded (/etc/rc.d/init.d/vmware-netdumper; bad; vendor preset: enabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

ensure environment variables are set

ensure environment variables are set

Checking for service vmware-psc-clientrunning

● vmware-psc-client.service - LSB: VMWare PSC Client

   Loaded: loaded (/etc/rc.d/init.d/vmware-psc-client; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmware-psc-client.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf

   Active: active (running) since Sun 2018-06-17 17:15:45 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 847 ExecStart=/etc/rc.d/init.d/vmware-psc-client start (code=exited, status=0/SUCCESS)

    Tasks: 69

   Memory: 479.7M

      CPU: 44.479s

   CGroup: /system.slice/vmware-psc-client.service

           ├─934 vmware-psc-client -procname vmware-psc-client -home /usr/java/jre-vmware -server -Xmx160m -XX:CompressedClassSpaceSize=128m -Xss256k -XX:ParallelGCThreads=1 -pidfile /var/log/vmware/psc-client/tcserver.pid -Djava.util.logging.config.file=/usr/lib/vmware-psc-client/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djdk.map.althashing.threshold=512 -Xss228K -Xmx512m -XX:MaxPermSize=128m -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/vmware/psc-client/ -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintTenuringDistribution -Xloggc:/var/log/vmware/psc-client/gclogFile -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=2 -XX:GCLogFileSize=5M -XX:ErrorFile=/var/log/vmware/psc-client/hs_err_lotus_pid%p.log -ea -Djava.security.properties=/etc/vmware/java/vmware-override-java.security -Djava.endorsed.dirs=/var/opt/apache-tomcat-8.5.13/endorsed -classpath /usr/lib/vmware/common-jars/httpasyncclient-4.0.1.jar:/var/opt/apache-tomcat-8.5.13/bin/bootstrap.jar:/var/opt/apache-tomcat-8.5.13/bin/tomcat-juli.jar -Dcatalina.base=/usr/lib/vmware-psc-client -Dcatalina.home=/var/opt/apache-tomcat-8.5.13 -Djava.io.tmpdir=/usr/lib/vmware-psc-client/temp org.apache.catalina.startup.Bootstrap start

           └─936 vmware-psc-client -procname vmware-psc-client -home /usr/java/jre-vmware -server -Xmx160m -XX:CompressedClassSpaceSize=128m -Xss256k -XX:ParallelGCThreads=1 -pidfile /var/log/vmware/psc-client/tcserver.pid -Djava.util.logging.config.file=/usr/lib/vmware-psc-client/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djdk.map.althashing.threshold=512 -Xss228K -Xmx512m -XX:MaxPermSize=128m -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/vmware/psc-client/ -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintTenuringDistribution -Xloggc:/var/log/vmware/psc-client/gclogFile -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=2 -XX:GCLogFileSize=5M -XX:ErrorFile=/var/log/vmware/psc-client/hs_err_lotus_pid%p.log -ea -Djava.security.properties=/etc/vmware/java/vmware-override-java.security -Djava.endorsed.dirs=/var/opt/apache-tomcat-8.5.13/endorsed -classpath /usr/lib/vmware/common-jars/httpasyncclient-4.0.1.jar:/var/opt/apache-tomcat-8.5.13/bin/bootstrap.jar:/var/opt/apache-tomcat-8.5.13/bin/tomcat-juli.jar -Dcatalina.base=/usr/lib/vmware-psc-client -Dcatalina.home=/var/opt/apache-tomcat-8.5.13 -Djava.io.tmpdir=/usr/lib/vmware-psc-client/temp org.apache.catalina.startup.Bootstrap start

 

Jun 17 17:15:23 localhost.localdom systemd[1]: Starting LSB: VMWare PSC Client...

Jun 17 17:15:24 localhost.localdom vmware-psc-client[847]: ensure environment variables are set

Jun 17 17:15:45 localhost.localdom vmware-psc-client[847]: Starting vmware-psc-client ..................done

Jun 17 17:15:45 localhost.localdom systemd[1]: Started LSB: VMWare PSC Client.

Checking for /usr/bin/rbd-watchdog-linux: unused

● vmware-rbd-watchdog.service - LSB: VMware AutoDeploy

   Loaded: loaded (/etc/rc.d/init.d/vmware-rbd-watchdog; bad; vendor preset: enabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

VMware Appliance Stats Monitor is running.

VMware HTTP Reverse Proxy is running.

ensure environment variables are set

ensure environment variables are set

Checking for service vmware-stsd

running

● vmware-stsd.service - LSB: VMWare Security Token Service

   Loaded: loaded (/etc/rc.d/init.d/vmware-stsd; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmware-stsd.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf

   Active: active (running) since Sun 2018-06-17 17:16:34 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1731 ExecStart=/etc/rc.d/init.d/vmware-stsd start (code=exited, status=0/SUCCESS)

    Tasks: 97

   Memory: 602.2M

      CPU: 1min 22.519s

   CGroup: /system.slice/vmware-stsd.service

           ├─1755 vmware-stsd -procname vmware-stsd -home /usr/java/jre-vmware -server -pidfile /var/log/vmware/sso/tcserver.pid -errfile /var/log/vmware/sso/utils/vmware-stsd.err -Djava.util.logging.config.file=/usr/lib/vmware-sso/vmware-sts/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Xmx378m -XX:CompressedClassSpaceSize=160m -Xss256k -XX:ParallelGCThreads=1 -XX:MaxPermSize=160m -XX:ThreadStackSize=228k -Djdk.map.althashing.threshold=512 -Xss228K -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/vmware/sso/ -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintTenuringDistribution -Xloggc:/var/log/vmware/sso/gclogFile -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=2 -XX:GCLogFileSize=5M -XX:ErrorFile=/var/log/vmware/sso/hs_err_sts_pid%p.log -XX:HeapDumpPath=/var/log/vmware/sso/ -Xmx160m -XX:MaxPermSize=160m -XX:ThreadStackSize=256 -XX:ParallelGCThreads=1 -ea -XX:CompressedClassSpaceSize=128m -ea -Djava.security.egd=file:/dev/./urandom -Djava.security.properties=/usr/lib/vmware-sso/vmware-sts/conf/vmware-identity-override-java.security -Djava.ext.dirs=/usr/java/jre-vmware/lib/ext:/usr/java/packages/lib/ext:/opt/vmware/jre_ext -Djava.endorsed.dirs=/var/opt/apache-tomcat-8.5.13/endorsed -classpath /var/opt/apache-tomcat-8.5.13/bin/bootstrap.jar:/var/opt/apache-tomcat-8.5.13/bin/tomcat-juli.jar -Dcatalina.base=/usr/lib/vmware-sso/vmware-sts -Dcatalina.home=/var/opt/apache-tomcat-8.5.13 -Dorg.apache.catalina.connector.CoyoteAdapter.ALLOW_BACKSLASH=true -Djava.io.tmpdir=/usr/lib/vmware-sso/vmware-sts/temp org.apache.catalina.startup.Bootstrap start

           └─1758 vmware-stsd -procname vmware-stsd -home /usr/java/jre-vmware -server -pidfile /var/log/vmware/sso/tcserver.pid -errfile /var/log/vmware/sso/utils/vmware-stsd.err -Djava.util.logging.config.file=/usr/lib/vmware-sso/vmware-sts/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Xmx378m -XX:CompressedClassSpaceSize=160m -Xss256k -XX:ParallelGCThreads=1 -XX:MaxPermSize=160m -XX:ThreadStackSize=228k -Djdk.map.althashing.threshold=512 -Xss228K -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/vmware/sso/ -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintTenuringDistribution -Xloggc:/var/log/vmware/sso/gclogFile -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=2 -XX:GCLogFileSize=5M -XX:ErrorFile=/var/log/vmware/sso/hs_err_sts_pid%p.log -XX:HeapDumpPath=/var/log/vmware/sso/ -Xmx160m -XX:MaxPermSize=160m -XX:ThreadStackSize=256 -XX:ParallelGCThreads=1 -ea -XX:CompressedClassSpaceSize=128m -ea -Djava.security.egd=file:/dev/./urandom -Djava.security.properties=/usr/lib/vmware-sso/vmware-sts/conf/vmware-identity-override-java.security -Djava.ext.dirs=/usr/java/jre-vmware/lib/ext:/usr/java/packages/lib/ext:/opt/vmware/jre_ext -Djava.endorsed.dirs=/var/opt/apache-tomcat-8.5.13/endorsed -classpath /var/opt/apache-tomcat-8.5.13/bin/bootstrap.jar:/var/opt/apache-tomcat-8.5.13/bin/tomcat-juli.jar -Dcatalina.base=/usr/lib/vmware-sso/vmware-sts -Dcatalina.home=/var/opt/apache-tomcat-8.5.13 -Dorg.apache.catalina.connector.CoyoteAdapter.ALLOW_BACKSLASH=true -Djava.io.tmpdir=/usr/lib/vmware-sso/vmware-sts/temp org.apache.catalina.startup.Bootstrap start

 

Jun 17 17:15:58 localhost.localdom systemd[1]: Starting LSB: VMWare Security Token Service...

Jun 17 17:15:58 localhost.localdom vmware-stsd[1731]: ensure environment variables are set

Jun 17 17:16:34 localhost.localdom vmware-stsd[1731]: Starting vmware-stsd.  Request for http://localhost:7080/afd failed after 1 seconds. Status: /usr/bin/curl status. Response: 000. Host: ;; connection timed out; no servers could be reached.  Request for http://localhost:7080/afd failed after 1 seconds. Status: /usr/bin/curl status. Response: 000. Host: ;; connection timed out; no servers could be reached  Increasing the timeout window to 2 seconds..  Request for http://localhost:7080/afd failed after 2 seconds. Status: /usr/bin/curl status. Response: 000. Host: ;; connection timed out; no servers could be reached  Increasing the timeout window to 3 seconds.........done

Jun 17 17:16:34 localhost.localdom systemd[1]: Started LSB: VMWare Security Token Service.

ensure environment variables are set

ensure environment variables are set

Checking for VMware STS IDM Server ...running

● vmware-sts-idmd.service - LSB: Start and Stop vmware-sts-idmd

   Loaded: loaded (/etc/rc.d/init.d/vmware-sts-idmd; bad; vendor preset: enabled)

  Drop-In: /etc/systemd/system/vmware-sts-idmd.service.d

           └─50-BlockIOAccounting.conf, 50-CPUAccounting.conf, 50-MemoryAccounting.conf

   Active: active (running) since Sun 2018-06-17 17:15:58 ICT; 7h ago

     Docs: man:systemd-sysv-generator(8)

  Process: 1568 ExecStart=/etc/rc.d/init.d/vmware-sts-idmd start (code=exited, status=0/SUCCESS)

    Tasks: 24

   Memory: 155.1M

      CPU: 1min 34.356s

   CGroup: /system.slice/vmware-sts-idmd.service

           ├─1595 vmware-sts-idmd -procname vmware-sts-idmd -wait 120 -server -Xmx168m -XX:CompressedClassSpaceSize=160m -Xss256k -XX:ParallelGCThreads=1 -XX:ErrorFile=/var/log/vmware/sso/hs_err_idm_pid%p.log -XX:HeapDumpPath=/var/log/vmware/sso -home /usr/java/jre-vmware -pidfile /var/run/vmware-sts-idmd.pid -errfile /var/log/vmware/sso/vmware-sts-idmd.err -cp /opt/vmware/lib64/commons-lang-2.5.jar:/opt/vmware/lib64/commons-logging-1.1.1.jar:/opt/vmware/lib64/log4j-api-2.2.jar:/opt/vmware/lib64/log4j-1.2-api-2.0.2.jar:/opt/vmware/lib64/log4j-core-2.2.jar:/opt/vmware/lib64/log4j-1.2.12rsa-1.jar:/opt/vmware/lib64/jna.jar:/opt/vmware/lib64/commons-daemon-1.0.8.jar:/opt/vmware/lib64/bcpkix-jdk15on-147.jar:/opt/vmware/lib64/bcprov-jdk15on-147.jar:/opt/vmware/lib64/vmware-identity-platform.jar:/opt/vmware/lib64/vmware-identity-idm-interface.jar:/opt/vmware/lib64/vmware-identity-idm-server.jar:/opt/vmware/lib64/vmware-identity-diagnostics.jar:/opt/vmware/lib64/bcprov-jdk16-145.jar:/opt/vmware/lib64/authentication-framework.jar:/opt/vmware/lib64/afd-heartbeat-service.jar:/opt/vmware/lib64/httpclient-4.5.1.jar:/opt/vmware/lib64/authapi-8.5.jar:/opt/vmware/lib64/cryptoj-6.1.jar:/opt/vmware/lib64/xmlsec-1.5.5.jar:/opt/vmware/lib64 -Djava.rmi.server.codebase=file:////opt/vmware/lib64/vmware-identity-idm-interface.jar file:////opt/vmware/lib64/vmware-identity-idm-server.jar -Djava.security.policy=/opt/vmware/share/config/server.policy -Dvmware.log.dir=/var/log/vmware/sso -Dlog4j.configurationFile=file:///opt/vmware/share/config/log4j2.xml com.vmware.identity.idm.server.IdmServer

           └─1596 vmware-sts-idmd -procname vmware-sts-idmd -wait 120 -server -Xmx168m -XX:CompressedClassSpaceSize=160m -Xss256k -XX:ParallelGCThreads=1 -XX:ErrorFile=/var/log/vmware/sso/hs_err_idm_pid%p.log -XX:HeapDumpPath=/var/log/vmware/sso -home /usr/java/jre-vmware -pidfile /var/run/vmware-sts-idmd.pid -errfile /var/log/vmware/sso/vmware-sts-idmd.err -cp /opt/vmware/lib64/commons-lang-2.5.jar:/opt/vmware/lib64/commons-logging-1.1.1.jar:/opt/vmware/lib64/log4j-api-2.2.jar:/opt/vmware/lib64/log4j-1.2-api-2.0.2.jar:/opt/vmware/lib64/log4j-core-2.2.jar:/opt/vmware/lib64/log4j-1.2.12rsa-1.jar:/opt/vmware/lib64/jna.jar:/opt/vmware/lib64/commons-daemon-1.0.8.jar:/opt/vmware/lib64/bcpkix-jdk15on-147.jar:/opt/vmware/lib64/bcprov-jdk15on-147.jar:/opt/vmware/lib64/vmware-identity-platform.jar:/opt/vmware/lib64/vmware-identity-idm-interface.jar:/opt/vmware/lib64/vmware-identity-idm-server.jar:/opt/vmware/lib64/vmware-identity-diagnostics.jar:/opt/vmware/lib64/bcprov-jdk16-145.jar:/opt/vmware/lib64/authentication-framework.jar:/opt/vmware/lib64/afd-heartbeat-service.jar:/opt/vmware/lib64/httpclient-4.5.1.jar:/opt/vmware/lib64/authapi-8.5.jar:/opt/vmware/lib64/cryptoj-6.1.jar:/opt/vmware/lib64/xmlsec-1.5.5.jar:/opt/vmware/lib64 -Djava.rmi.server.codebase=file:////opt/vmware/lib64/vmware-identity-idm-interface.jar file:////opt/vmware/lib64/vmware-identity-idm-server.jar -Djava.security.policy=/opt/vmware/share/config/server.policy -Dvmware.log.dir=/var/log/vmware/sso -Dlog4j.configurationFile=file:///opt/vmware/share/config/log4j2.xml com.vmware.identity.idm.server.IdmServer

 

Jun 17 17:15:45 localhost.localdom systemd[1]: Starting LSB: Start and Stop vmware-sts-idmd...

Jun 17 17:15:45 localhost.localdom vmware-sts-idmd[1568]: ensure environment variables are set

Jun 17 17:15:58 localhost.localdom vmware-sts-idmd[1568]: Starting VMware STS IDM Server ...done

Jun 17 17:15:58 localhost.localdom systemd[1]: Started LSB: Start and Stop vmware-sts-idmd.

msg_unused

● vmware-updatemgr.service - LSB: VMware Update Manager Server

   Loaded: loaded (/etc/rc.d/init.d/vmware-updatemgr; bad; vendor preset: enabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

vAPI Endpoint is not running.

<30>Jun 18 00:28:44 vmware-vcha: stopped

pg_ctl: server is running (PID: 2545)

/opt/vmware/vpostgres/9.4/bin/postgres "-D" "/storage/db/vpostgres"

vmware-vpxd is stopped

VMware vService Manager is not running.

root@localhost [ ~ ]#

 

I've tried many ways but cannot start service to access GUI

hello.

I have A VSAN Environment and with this problem the size of the server is 4 tera but in the server it self it is only 60 gb .

I wonder if someone  know this issue .and if it's realy take the space or is it just a bug

Приветствую коллеги.

При развертывании VCSA 6.7 в тестовом окружении имеется проблема, на этапе завершения деплоя сбрасывается значение шлюза (gateway). При этом на протяжении всего деплоя уверенный PING.

При перезагрузке виртуального сервера VCSA проходит несколько команд PING, потом шлюз опять сбрасывается в no set.

Как временное решение помогло добавление второго сетевого адаптера E1000 и передача настроек ему.

Есть ли какие-нибудь мысли по исправлению ошибки?

Были ли у кого то аналогичные проблемы?

P.S. VCSA 6.5 с теме же параметрами, на тех же хостах и датасторах данной проблемы нет.

P.P.S. К сожалению открыть кейс в VMware нет возможности, подписка только на обновления.

Hi

Where can I find vSphere client for Esxi 6.5 ?

In a previous post (see Return code from new-snapshot ) I asked how to get a return code from new-snapshot.

I created a script line like:

$my_snapshot = new-snapshot -VM $my_vm -name $snapshot_neme -Description $description

        if ($my_snapshot)

            {

                ...

            }

        else

            {

                ...

            }

and il works fine.

However, how can I investigate the reason (if any) because a snapshot was not created?

Regards

marius

Folks,

I am a VMWare beginner and am trying to get my head around how to install vSphere on my hardware.  I have the applicable licenses for my 2 CPUs, and have no issue installing a version of ESXi on the R640 and creating my vCSA.  From that point everything seems to go wrong though.

I cant for the life of me work out how to connect the MD3400.  The device is physically attached to the host via dual 12G SAS HBA, but the ESXi host only sees the onboard BOSS-S1 raid card.

I did some reading and saw some articles about the MD3420 not being able to be direct connect, but nothing about the MD3400.

I'm guessing I'm missing a simple step, but cant seem to find anyone who has setup a similar configuration. 

Any hints would be greatly appreciated.

Thanks

Brenden

Hi,

I've faced following issue. We had vCenter 6.5 on windows as embedded PSC. This server was migrated to VCSA 6.7 and all looks good except one thing - permissions. All permissions from active directory were missing except Global permissions. I have added all again. Now I have upgraded to 6.7.0a through :5480 UI. After services restart I lost permissions again.

Does anybody face same issue?

Thanks

We are struggling with Microsoft modern apps and Persona Management. We get working all what we need but Microsoft Edge is a beast...

If the folder "AppData\Local\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe" is roam with PM, Edge open and close immediately. Something seems to prevent Edge to be modified by an external process. The copy procedure from Persona share to user profile at login time seems to break something.

Have you figure out how to use Edge with PM?

VMware Horizon 7.4

Windows 10 Build 1709

Thanks!

How can I copy alarms from one 6.5 vCenter to another? I have about 9 other vCenter I would like to have set up the exactly how I have my first vCenter.

Hi All,

Here is my current configuration and what's not working:

VCenter

     Host 1

          VDR Appliance 1

          VCenter Server

          Multiple Windows Virtual Machines

     Host 2

          VDR Appliance 2

          Multiple Windows Virtual Machines

- VDR Appliance 1 can ping all other machines and hosts and can also be pinged.

- VDR Appliance 2 is unable to ping any other machines or hosts or be pinged itself.  Can ping localhost however.    

- If I move VDR Appliance 2 to Host 1 then it can ping all other machines just like VDR Appliance 1 can.

- If I move VDR Appliance 1 to Host 2 then it can't ping all other machines just like VDR Appliance 2 can't.

- VDR Appliance 2 is on the same vSwitch as other Windows virtual machines and they connect fine.

Firstly, is it possible to have 1 VCenter server supporting a VDR Appliance on a separate host or does each VDR Appliance need its own VCenter server on each separate host?

Any help with this would be greatly appreciated, I'm at a loss as to why a VDR Appliance can't talk on the network whilst sitting under Host 2.

Hey all,

Is there any difference between vSphere client and vShpere web client? Which is the best one to install?

Hello

I have a 2016 IAAS VM and I tried to add the management agent to it from a vRA 7.3.1 appliance. I get the schannel error below. Error is when I have entered the appliance VIP and login details and have successfully got back the cert fingerprint but when i go NEXT I get the error

                    The underlying connection was closed

In event viewer

Event ID:38761  Schannel: A fatal error occurred while creating a TLS client credential. Internal error 10013

I have checked IAAS 2016 server

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols

TLS 1.0 client and Server set to disabled

TLS 1.1 & 1.2 client and server set to Enabled 0xffffffff

Anyone any ideas?

Thanks

Chris

Good Morning Everyone,

I can open the Apple side no problem, but when clicking the large play button to start windows the whole computer shuts down and reboots. I can not open Windows at all.  Does anyone know what this is from and how it can be fixed?  

Thank you in advance

Hi folks,

We recently deployed Windows 10 desktops and App Volumes/ UEM.

Give you an idea - linked clone/floating:

- Windows 10 Pro x64

- VMWare Tools 10.1.15.6677369

- Horizon Agent 7.4.0

The problem: A user prints off a PDF file using Thin Print and it sometimes (not always) prints it out as garbled text, other times, it will not print out the whole document, only parts.

I'm not sure why this is happening. I have generated Thin Print logs but am not sure what I'm looking for - perhaps someone here might know?

I've tried different versions of the agent/tools to no avail. Different PDF applications. Various printer settings.

Anyone come across this and could possibly advise on some things to try?

Many thanks,

Travis

Hi,

we have around 300 blueprint in our vRA-Designer. These blueprints represent our different test environments of our software versions. All blueprints consist only of some vcenter vms and a network. The vcenter vms are frequently updated because we often change our software version on the vms (CI/CD). Therefore we have to change the vm reference of the blueprint to a new updated vm (the old reference will be deleted). This is done by an orchestrator workflow that updates the blueprint after a "Advanced force data collection"-workflow has finished which runs first. The data collection part takes approximately 10 minutes. So due to our update frequency its very likely that multiple blueprints must be updated in a 10 minute period and the long running "Advanced force data collection"-worklow runs multiple times. If this is the case the "Advanced force data collection"-workflow run time is much longer or a Dead-Lock-Situation appears. As a result the blueprint must be manually updated after the vRA-Built-In-Data-Collection completed successfully (configured to run every 15 minutes in our environment).

I would like to ask if its maybe possible to update a specific entry of the vRA-Data-Collection (e. g. a virtual machine) and not the whole cluster? Could anybody help me with this?

Please find the "Advanced force data collection"-workflow here: https://communities.vmware.com/docs/DOC-28063

Kind regads

Thomas

Hi

I have a 3 hosts vSAN cluster and my vms are deployed with FTT=1.

Now I assum that VM1 is deployed with a vmdk copy in host1, the second copy in host2 and the witness in host3.

If I loose host1 and 3 my VM is dead.

The question is: there's a way to restore the data since I have a full vmdk in host2 ?

If I add 2 new hosts, the second vmdk and the witness are automatically created ?

Thanks in advance

vmb

We tried updating our 5.5 update 3b environment to 6.5 and there are errors that are occruing in our that support cannot explain. I have an SR open but I get the feeling the best option is to rebuild the vcenter server. We do have a new 6.5 environment currently setup, the plan was to upgrade our current environment to 6.5, which would allow cross vcenter vmotion. I'm thinking if we need to completely reinstall vcenter from scratch, why shouldn't we just connect the 5.5 hosts to our 6.5 appliance directly? These 5.5 server have standard switches, so the switches should migrate over fine. If this doesn't sound like a good plan, has anyone else tried something similar. We also have SRM installed, so I think these our options

1.)Reinstall vcenter as a 5.5 vcenter. This requires SRM and vSphere replication to be reinstalled

2.)Reinatall vcenter as a 6.5 vcenter. Install SRM and vSphere at the correct levels

3.)Disconnect hosts from 5.5 vcenter and connect to new 6.5 environment.

Thanks for any suggestions