Quantcast
Channel: VMware Communities : Discussion List - All Communities
Viewing all articles
Browse latest Browse all 176483

VMware Workstation 9: Could not open /dev/vmmon: No such file or directory

$
0
0

I am having a plethora of problems with installing and getting VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0-26-generic).

 

I have gone through exactly the same process on my laptop and it works perfectly, whereas on the desktop it seems everything breaks. Could someone give me some sort of help / hints on how I can go about getting this working. I have tried complete uninstall / reinstalls of the software, kernel headers, kernel images, different kernels, patches from here on fresh installs amongst everything else I can think of. Here's the issues I face in the order of importance (or so I think):

 

1) Whenever I try to open my virtual machine (and fresh ones), I get the error sequence of:

"Could not open /dev/vmmon: No such file or directory. Please make sure that the kernel module `vmmon' is loaded." -> "Failed to initialize monitor device." -> "Unable to change virtual machine power state: Cannot find a valid peer process to connect to"


2) Whenever I try to run the following command to setup the modules on a completely fresh setup (reinstalled kernel, vmware) I get the following output:

sudo vmware-modconfig --console --install-all

Stopping VMware services:

   VMware Authentication Daemon                                        done

   VM communication interface socket family                            done

   Virtual machine communication interface                             done

   Virtual machine monitor                                             done

   Blocking file system                                                done

Using 2.6.x kernel build system.

make: Entering directory `/tmp/modconfig-G9S0TM/vmmon-only'

/usr/bin/make -C /lib/modules/3.8.0-26-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= modules

make[1]: Entering directory `/usr/src/linux-headers-3.8.0-26-generic'

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M]  /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M]  /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: "mcount" [/tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC      /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M]  /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-26-generic'

/usr/bin/make -C $PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= postbuild

make[1]: Entering directory `/tmp/modconfig-G9S0TM/vmmon-only'

make[1]: `postbuild' is up to date.

make[1]: Leaving directory `/tmp/modconfig-G9S0TM/vmmon-only'

cp -f vmmon.ko ./../vmmon.o

make: Leaving directory `/tmp/modconfig-G9S0TM/vmmon-only'

Using 2.6.x kernel build system.

make: Entering directory `/tmp/modconfig-G9S0TM/vmnet-only'

/usr/bin/make -C /lib/modules/3.8.0-26-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= modules

make[1]: Entering directory `/usr/src/linux-headers-3.8.0-26-generic'

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M]  /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M]  /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: "mcount" [/tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC      /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M]  /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-26-generic'

/usr/bin/make -C $PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= postbuild

make[1]: Entering directory `/tmp/modconfig-G9S0TM/vmnet-only'

make[1]: `postbuild' is up to date.

make[1]: Leaving directory `/tmp/modconfig-G9S0TM/vmnet-only'

cp -f vmnet.ko ./../vmnet.o

make: Leaving directory `/tmp/modconfig-G9S0TM/vmnet-only'

Using 2.6.x kernel build system.

make: Entering directory `/tmp/modconfig-G9S0TM/vmblock-only'

/usr/bin/make -C /lib/modules/3.8.0-26-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= modules

make[1]: Entering directory `/usr/src/linux-headers-3.8.0-26-generic'

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

/tmp/modconfig-G9S0TM/vmblock-only/linux/control.c: In function ‘ExecuteBlockOp’:

/tmp/modconfig-G9S0TM/vmblock-only/linux/control.c:285: warning: assignment from incompatible pointer type

/tmp/modconfig-G9S0TM/vmblock-only/linux/control.c:296: warning: passing argument 1 of ‘putname’ from incompatible pointer type

include/linux/fs.h:2052: note: expected ‘struct filename *’ but argument is of type ‘char *’

  CC [M]  /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

/tmp/modconfig-G9S0TM/vmblock-only/linux/inode.c:49: warning: initialization from incompatible pointer type

/tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.c:38: warning: initialization from incompatible pointer type

/tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:

/tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.c:104: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast

/tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.c:104: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’

  LD [M]  /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: "mcount" [/tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

WARNING: "putname" [/tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC      /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M]  /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-26-generic'

/usr/bin/make -C $PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= postbuild

make[1]: Entering directory `/tmp/modconfig-G9S0TM/vmblock-only'

make[1]: `postbuild' is up to date.

make[1]: Leaving directory `/tmp/modconfig-G9S0TM/vmblock-only'

cp -f vmblock.ko ./../vmblock.o

make: Leaving directory `/tmp/modconfig-G9S0TM/vmblock-only'

Using 2.6.x kernel build system.

make: Entering directory `/tmp/modconfig-G9S0TM/vmci-only'

/usr/bin/make -C /lib/modules/3.8.0-26-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= modules

make[1]: Entering directory `/usr/src/linux-headers-3.8.0-26-generic'

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M]  /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M]  /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: "mcount" [/tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC      /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M]  /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-26-generic'

/usr/bin/make -C $PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= postbuild

make[1]: Entering directory `/tmp/modconfig-G9S0TM/vmci-only'

make[1]: `postbuild' is up to date.

make[1]: Leaving directory `/tmp/modconfig-G9S0TM/vmci-only'

cp -f vmci.ko ./../vmci.o

make: Leaving directory `/tmp/modconfig-G9S0TM/vmci-only'

Using 2.6.x kernel build system.

make: Entering directory `/tmp/modconfig-G9S0TM/vsock-only'

/usr/bin/make -C /lib/modules/3.8.0-26-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= modules

make[1]: Entering directory `/usr/src/linux-headers-3.8.0-26-generic'

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M]  /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M]  /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: "mcount" [/tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC      /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M]  /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-26-generic'

/usr/bin/make -C $PWD SRCROOT=$PWD/. \

   MODULEBUILDDIR= postbuild

make[1]: Entering directory `/tmp/modconfig-G9S0TM/vsock-only'

make[1]: `postbuild' is up to date.

make[1]: Leaving directory `/tmp/modconfig-G9S0TM/vsock-only'

cp -f vsock.ko ./../vsock.o

make: Leaving directory `/tmp/modconfig-G9S0TM/vsock-only'

Starting VMware services:

   Virtual machine monitor                                            failed

   Virtual machine communication interface                            failed

   VM communication interface socket family                           failed

   Blocking file system                                                done

   Virtual ethernet                                                   failed

   VMware Authentication Daemon                                        done

Unable to start services

 

3) I often get Ubuntu "this program has crashed" messages about "/usr/lib/vmware-installer/2.1.0/vmis-launcher"" (this crash message always occurs when running the "vmware-modconfig" command above on a fresh install.

 

4) At various times when installing and having VMware workstation on my system I get Ubuntu crashes about "/usr/lib/vmware/bin/appLoader" and even "/bin/su" (especially when attempting to install - su NEVER crashes anywhere else).

 

Thoughts / ideas on what on earth is going on / what could have caused this all to go so downhill / how to go about fixing?

 

Thanks


Viewing all articles
Browse latest Browse all 176483

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>