Multiple Uplink groups on VDs

Dear Experts

Issue with VDs with multiple uplink groups

I have pair of uplink groups categories as

1) Production NIC Pair (1 Active and 1 Standby) for VLAN 1,2 and 3

2) Test Servers NIC Pair (1 Active and 1 Standby) for VLAN 4,5 and 6

3) Mgmt svr NIC Pair (1 Active and 1 Standby) only for VLAN 20

4) VMotion NIC Pair  (1 Active and 1 Standby) only for VLAN 40

5) FT NIC Pair  (1 Active and 1 Standby) only for VLAN 41

I connected all uplink to my VDS and created port groups with VLAN TYPE: VLAN even VLAN trunk and test a VM but NO connectivity.

VM only connecting when i configure port group VLAN TYPE as None

How can i configure this VDs, So each port group with specific vlan and its traffic will utilize that concern active uplink.

Note: Host are HP Blades servers, uplinks are SUS (Shared Uplink Sets)  from HP FlexFabric interconnect module on Enclosure C7000.

Thanks